|
Front End Load Specifications
|
| Material Standards |
The body of the container is fabricated
from commercial quality sheet steel |
| Safety Standards |
Compliant with all applicable OSHA and ANSI
Z.245 series standards |
| Container Bottom |
10 ga with stiffeners running side to side,
2 bottom channel on 1 through 4 yd, 3 bottom channel on
6 through 10 yd running front to back |
| Container Sides, Front and Back |
12 gauge steel; front and back have V stiffeners |
| Top Perimeter |
10 gauge steel; formed 1 1/2" x 3"
with 1" lip formed inside making a G |
| Drain Plugs |
1 1/2" drain plug |
| Bumper Pads |
3/16 x 4" x 4" x 16" |
| Lifting Sleeves |
3/16" steel |
| Fork Guides |
1/4" steel. Top guide will be covered
by the "No-Step" panel on top of the sleeve |
| Lids |
P.R.T. single wall, Duraflex double wall
available |
| Casters |
Included in 1 yd through 3 yd prices. 4
yd through 10 yd optional |
| Side Doors |
(2) 30" x 30" PRT plastic side
doors (Optional on a 6 & 8 yd upright containers) |
|
NOTE: All perimeter channels are
interlocking
|
