REL Base Specifications and Optional Items

Rear End Load Specifications
Material Standards	The body of the container is fabricated from commercial quality sheet steel
Safety Standards	Compliant with all applicable OSHA and ANSI Z.24 series standards
Container Bottom	The bottom is 10-gauge with 2 stiffeners running side and 2 bottom channels 1 1/2" x 3" running front to back with pads for casters.
Container Sides, Front and Back	12-gauge steel
Coatings--Primer and Paint	1 coat primer/rust inhibitor, 2 coats industrial paint outside
Top Perimeter	10 ga formed channel, 1 1/2" x 3" with 1" lip on outside (Forming a G type channel)
Drain Plugs	1 1/2" drain plug
Trunion Bar	1 1/2" diameter rod
Lids	P.R.T. single wall, Duraflex double wall available
Casters	Included in 1 yd through 4 yd prices. 6 yd through 10 yd optional
NOTE: All perimeter channels are interlocking