|
ROLL-OFF CONTAINER SPECIFICATIONS
|
| Material Standards |
The body of the container is fabricated
from commercial quality sheet steel |
| Safety Standards |
Compliant with all applicable OSHA and ANSI
Z.245 series standards |
| Style and Capacities |
Open top tub style - 10, 15, 20, 25, 30,
40, and 50 cubic yards |
| Floor Sheet |
7 gauge (3/16") |
| Sidewalls |
10 gauge |
| Bulkhead Panel |
10 gauge |
| Front Rails |
4" x 4" x 3/16" tubing |
| Front Roller |
4" x 6" nose roller with 1 1/2"
axle with grease zert |
| Rail Gussets |
1/4" on every cross member |
| Pull Plate |
1" plate |
| Pull Hook |
1 1/4" |
| Ladders |
4 step front and rear OSHA standards |
| Bottom Main Rails |
3/16 x 2" tubing |
| Cross-members |
3/16 x 1 1/2 x 3" formed |
| Rear Cross-Member |
1/4" |
| Cross-member End Cap Rail |
3/16" |
| Top Rails |
4" x 4" x 3/16" tubing |
| Rear Door Panel |
10 gauge |
| Door Latch Movement |
Ratchet type |
| Ground Rollers |
8" x 10" front and back |
| All Axles |
1 1/2" w/grease zert |
| Skid Stops |
1/2" x 6" flat bar formed |
| Latch Lock Plate |
7/16" plate, A36 minimum |
| Door Vertical Members |
10 ga x 3" x 4" |
| Door Horizontal Members |
10 ga x 3" x 4"/bottom member
3/16 x 3" x 6" |
| Door Latch & Hinge Plates |
7/16" door latch, hinge plate 1" |
| Sidewall Rear Corner Columns |
1/4 x 9" x 10" with gussets |
| Standard Coating |
1 coat primer/rust inhibitor, 2 coats industrial
paint outside |
